Verotek FE 6001 PRO- airless spray system

Item 1 of 1

Professional airless spraying system supplied with supply tank 70L. Capacity is about 50-100 m2/hour per layer of 2 mm Decidamp SP150 and 100-150 m2/hour per layer of 2 mm Decicoat T35.

The airless spraying system is very suitable for handling large areas. Very professional airless plaster plunger pump, for spraying pastes. Also for other types of thin plaster, fireproof coatings, latex, water-based wall paints, coatings, etc. This model is electronically controlled and equipped with a pressure sensor that turns off the pump when the desired pressure is reached. For heavy industrial daily use. To be used for large projects. Pay attention! To be able to spray well, a pump must have a minimum yield of 5.5 l / min. With its 6.5 l / min, this airless plunger pump has more than enough capacity. The Graco Mark X is similar, but its expensive machines and it is therefore a high threshold to purchase such a machine.

In cooperation with a manufacturer we can offer this comparable machine at a competitive rate. Of course, the machine is delivered complete with 15m hose 3/8 ", gun with 2.25 and 5.25 pasta spray tip.

Technical data:

Engine power: 1.80 Kw

Voltage: 230 Volt

Pump type: plunger pump (piston)

Engine Type: CD (Carbonless)

Max. pressure: 227 bar - 3300 PSI

Capacity: 6.5 l / min

Length of spray hose: 15 meters

Weight: approx. 61 Kg

Includes: spray gun, 15 meter hose 3/8 "and pasta spray tip 2.25 and 5.25

Are you interested? Feel free to contact us.

© 2015 - 2021 www-lsh-bv-nl | sitemap | rss | ecommerce software - powered by MyOnlineStore